In NT 4.0, double click on My Computer. Double click on Dial Up Networking. Press OK if asked to add an entry or press New if an entry already exists. To edit an existing entry, right-click on the icon, choose Properties, then Edit.

On the Basic tab, enter the following:

Entry Name: APU
Phone number: enter the Phone Number.
Dial using: Select the COM port your modem is installed on
After Dial Using press the Configure button
Ensure modem parameters are set to initial speed of 57600 or higher, Enable hardware flow control and Enable modem error control. Press OK.
Under the Server Tab, select the following:

Dial-up Server Type: PPP Windows NT, Windows 95, 95 Plus, Internet.
Under Network Protocols: Select TCP/IP and uncheck anything else.
Check Enable software compression.
Check Disable PPP LCP extensions.
Press the TCP/IP Settings button. Under TCP/IP, select:
Server assigned IP address.
Server assigned name server address.
Under Primary and Secondary Wins, you should see all zeros
Check Use IP header compression
Check Use default gateway on remote network.
Under the Script Tab, select nothing.
On the Security Tab, check Accept any authentication including clear text. Click OK.

Information Required
Dial Up Access
User name: _______________________
Password: ________________________
Phone Number
Email
User Name: ____________________
Password: ____________________
Email Address: ____________________
Type of server: POP3
Incoming mail server: mail.cnsp.com
Outgoing mail server: mail.cnsp.com